Power Output: 160W/Channel into 8 Ohms

Power Bandwidth: (-3dB Points) DC to 150 kHz into 8 ohms

Input Sensitivity: 1.9V RMS Bal. & Unbal.

Input Impedence: 150K ohms Unbal., 300K ohms Bal. differential

Input Polarity: Non-inverting at Unbal. inputs. Bal. pin 2+(IEC-268)

Output Regulation: 0.07dB 8 ohm load to open circuit (Damping factor 130)

Negative Feedback: 21dB

Slew Rate: 50 volts/microsecond

Rise Time: 1.7 microseconds

Hum & Noise: Less than 60 microvolts RMS (116dB below rated output IHF A-weighted)

Power Supply Capacitance: 175,000 uF total

Frequency Response: +/-.5dB, 1.5Hz to 100kHz, -3dB below 0.1Hz and above 400Khz

Distortion: Less than .01% at 2V RMS output

Gain: Main output- 18.3dB Bal., 12.7dB Unbal.

Input Impedence: 200K ohms Bal., 100K ohms Unbal.

Output Impedence: 400 ohms Bal., 200 ohms Unbal. main (2), 20K ohms min. load and 2000pF max. capacitance

Maximum Input: 20V

Rated Outputs: 2V RMS, 1Hz to 100kHz into 100K ohm Bal. load (Max. Bal. output capability is 35V RMS at less than ).5% THD at 1kHz)

Noise: 12uV RMS residual IHF weighted Bal. noise output with gain control min., (104dB below 2V RMS output)

Frequency Response: 30-24,000Hz =/-2dB

Bass Control Switch: -3dB from 40-150Hz

Crossover Frequency: 250Hz at 12dB per octave

Dispersion: Horizontal: 30 degrees

Sensitivity: 89dB/2.83 volts/meter

Power Handling: 200W/Channel

Inpedence: Nom.: 4 ohms, Min.: 1.5 ohms at 24kHz w/an electrical phase angle of 0

Output Impedence: 350 ohms Bal., 175 ohms Unbal.

Frequency Response: 0.1-20kHz +/-0.2dB

Signal to Noise Ratio: 95dBA

Distortion: -80dB (0.01%) 1kHz

Channel Separation: 94dB 1kHz

Phase Linearity: +/-0.5 20-20kHz

MIT T-3 Proline XLR Interconnects

Jazz